Performance and Features:
1. Three boot modes can be set:
(a) Lubrication: Start the lubrication time first.
(b) Intermittent: Perform intermittent timing first when starting up.
(c) Memory: continuation upon boot...
Model: YSM - A
Category: YSM oil mist oiler
Performance and Features:
1. Three boot modes can be set:
(a) Lubrication: Start the lubrication time first.
(b) Intermittent: Perform intermittent timing first when starting up.
(c) Memory: continue the previous actuation time when starting up.
2, lubrication and intermittent time can be adjusted, the minimum unit of lubrication time is 0.1 seconds.
3, a liquid level switch, the oil is insufficient when the buzzer will send out an alarm, the level abnormal signal output.
4, can be set according to the mechanical number of intermittent cycle counting basis.
5. The panel screen and indicator light can show the operation and abnormal state of the oiler.
6, at the same time to provide cooling, lubrication, chip removal, improve the production speed to reduce mechanical wear.
7. The oil content in the gas can be adjusted.
8, the cooling effect is good.
9, suitable for high-speed, high precision machinery use.
10. If the working pressure is kept at 3kgf/cm², the required air volume is about 31L/min.
Appearance size drawing
Type technical parameters:
| Lubrication time (S) | The intermittent time (S/M/T) | Single phase voltage(VAC) | Output contact capacity(A) | Spit out diameter | Gas pressure range(kgf/cm²) | Particle size after atomization(µm) | Liquid level switch | Fuel tank capacity(L) | Weight(kg) | |||||
YSM-A | 1 ~ 999 | 1 ~ 999 | 110 or 220 | 3 | Ø6 or Ø8 | 3 ~ 5 | 4 ~ 10 | Under the current | 4L(Sheet metal) | 10.1 |
tel:
+86-573-88112730