Performance and Features:
The pump is mainly used in the delivery of cutting fluids in tool machines and other cleaning and filtration systems. Applicable fluids include water solubility, ground viscosity, neutral...
Type:
Category: Motor pumps
Performance and Features:
The PUMP IS MAINLY USED IN THE CONVEYANCE OF CUTTING FLUIDS AND OTHER CLEANING AND FILTRATION SYSTEMS OF tool machines. The suitable fluids include water-soluble, ground viscosity, neutral cooling and lubricating fluids.
(When used, please ensure that the height of the liquid level is not lower than the suction position of the pump)
Appearance size drawing
Type technical parameters:
Item no. | Voltage | 110V/220V or 220V/380V or 220V/440V or 208V/415V | ||||||||||
Horsepower(HP) | H | ØA | ØB | E | D | Y | Outlet | L | Pumping(2m) | Weight(kg) | ||
30701 | 1/8 | 150 | 128 | 8 | 125 | 90 | 18 | PT3/8" | 110/130/150/180/210 | 25L/min | 6.5 | |
1/4 | 170 | 158 | 9 | 180 | 125 | 20 | PT1/2" | 150/180/210/270 | 60L/min | 13.5 | ||
1/2 | 230 | 170 | 9 | 180 | 140 | 20 | PT3/4" | 150 | 107L/min | 19.4 | ||
1/2 | 240 | 170 | 10 | 195 | 140 | 25 | PT3/4" | 175/210/300 | 107L/min | 19.4 | ||
1 | 295 | 170 | 10 | 195 | 150 | 27 | PT1" | 180/280 | 160L/min | 24.2 |
Note: The flow rate in the above table is the standard when the power frequency is 60HZ. When the power frequency is 50HZ, the flow rate will decrease by about 8%-15%. (When used, please ensure that the height of the liquid level is not lower than the suction position of the pump)
tel:
+86-573-88112730