Model: P-CP, P-AP, P-NP, P-PP
Category: Tubing category
Type technical parameters:
Name of product | Type | Item no. | Specifications | |||
The brass | P-CP | 30301 | Tube outer diameter × wall thickness | φ4×0..8 | φ6×0.8 | φ8×0.8 |
Minimum bending radius | R20 | R30 | R50 | |||
Using the pressure MPa | 10 | 80 | 63 | |||
Aluminum tube | P-AP | 30302 | Tube outer diameter × wall thickness | φ4×0.8 | φ6×0.8 | φ8×0.8 |
Minimum bending radius | R20 | R40 | R40 | |||
Using the pressure MPa | 3 | 3 | 3 | |||
Nylon tube | P-NP | 30304 | Tube outer diameter × wall thickness | φ4×1 | φ6×1 | φ8×1 |
Minimum bending radius | R20 | R30 | R50 | |||
Using the pressure MPa | 5 | 4 | 3 | |||
hose | P-PP | 30305 | Tube outer diameter × wall thickness | φ4×1 | φ6×1 | φ8×1 |
Minimum bending radius | R20 | R40 | R40 | |||
Using the pressure MPa | 1 | 1 | 1 |
Tubing service pressure
Note: Rubber hose is not recommended for positive displacement lubrication system.
Standard wall thickness: PP, NP 1.0mm; AP and CP are 0.8mm.
tel:
+86-573-88112730