Performance and Features:
1. The oil output can be accurately quantified by the adjustable quantitative valve, and the amount of each single point discharge can be adjusted in the range of 0.5 ~ 5.5mL. The oil output or forced refueling can be controlled by setting the working time of the pneumatic pump without the quantitative valve.
Model: YGP-AD
Category: YGP-AD Pneumatic lubrication system
Performance and Features:
1. The oil output can be accurately quantified by the adjustable quantitative valve, and the amount of each single point discharge can be adjusted in the range of 0.5 ~ 5.5mL. The oil output or forced refueling can be controlled by setting the working time of the pneumatic pump without the quantitative valve.
2, a variety of working modes (simultaneously, sequentially, on time) for choice;
3, lubrication and intermittent time, cycle times, detection function can be set;
4, each single point is equipped with detection or detection and visual function, can monitor the whole process;
5, with low liquid level shutdown and acousto-optic alarm function;
6, can realize automation;
7, applicable oil: 00# ~ 2# lithium base grease.
Scope of application:
YGP-AD type electric oiler is designed and developed for feed pellet machine, and other heavy equipment that needs a few fixed point lubrication points can be selected.
Appearance size drawing
Type technical parameters:
| Voltage (V) | The oil hole | Spit out quantity | Work pressure | The rated pressure(MPa) | Lubrication time | The intermittent time | Iron drum capacity | The oil drum volume (KG) | ||||
YGP-A | Single phase(conventional)AC220V | 2~4 | 0.85L/min | 5~7 | 20 | 1~999 | 1~999 | 30 | 15 | ||||
YGP-AD | Single phase(conventional)AC220V | Model 1/Model 2:0.5~5.5cc/cyc(adjustable) Model 3:0.85L/min | 13 |
Hydraulic schematic diagram
tel:
+86-573-88112730